All welded pan racks can be built as oven racks.
Match your oven lift to a coupler below and add hi-temp casters.

COUPLER OPTIONS:

In addition to these most common style lifts, we can adapt your oven rack for nearly any design lift you may have.

REVENT "A"

The original lift from Revent, also called the butterfly lift because of how it looks. The rack has one horizontal cross-tube at the top. At the center of this tube, and perpendicular to it, is a 1” round stub, welded to the tube, which centers the rack on the lift.

REVENT "C"

This is the more recent style lift from Revent. There is a pair of channels at each end of the rack, 2-1/4” High and 3” Long, standing 6” apart.

 "BAXTER"

The top of the rack for Baxter lift ovens has two 1-1/2” high X 1” wide channels, which run 36” long on double racks and 18” long on single end-load racks. These channels stand 16” apart on the inside.

 "DAHLEN"

This lift is a hook which comes down from the top of the oven. A 2” dia. roller held between two vertical guides engages the lift.

HI-TEMP MEDIUM DUTY OVEN CASTERS
Medium duty caster made with zinc-plated steel and a high temperature
wheel that is rated for a continuous temperature of 475 degrees and
can withstand intermittent temperatures of up to 550 degrees.

HI-TEMP HEAVY DUTY OVEN CASTERS
Heavy duty caster made with zinc-plated steel and a high temperature
wheel that is rated for a continuous temperature of 475 degrees and
can withstand intermittent temperatures of up to 550 degrees.

 
HI-TEMP FOOD GRADE GREASE FOR OVEN CASTERS

 
This is a white, mineral spirits based lubricant with a dropping point
(the temp. at which it becomes liquid) of 514 deg. F.  It comes in
standard cartridges and can be bought by the cartridge or in cases of 10. 
A must have for the proper maintenance of casters in high heat situations.

 
FASTENERS FOR CASTERS

 
We use heavy duty stainless steel fasteners to attach casters to all
our racks. We have a variety of bolt sizes to fit your application.